Fermax 23411 MDS Digital Keypad with Display

Zoom

Our Price:   £183.11 List Price:   £240.00 Saving Of:   £56.89 (24%) (Exc. 20% VAT)(£219.73 Inc. VAT) Catalogue No:  23411-Fermax Brand:  Fermax Availability:      Delivery Information Tweet

Fermax 23411 MDS Digital Keypad with Display

Telephone type keypad that lets you open the door when a previously programmed 6 digit code is entered.
CityLine Classic is the "continuous profile" outdoor panel line for buildings.
The PANELS are manufactured in anodized aluminium, highly resistant to rough weather and climate changes.

The panel design stands out for its curved-convex profile. A cellular rubber airtight seal included assures a perfect panel-to-wall fit to prevent water filtrations.
Available in several colours: aluminium, golden or bronze and white.

It is possible to combine two or more panels, as long as they are from the same series. For a perfect fit, a set of separators should be used for every two panels installed between their flush mounted boxes.
Backlit LCD 2 line display, 16 characters each.

Centralized MDS Access Control System. Composed of one part hardware: MDS central units, readers, decoders, etc. and one part software that lets you configure and manage the installation.
Restricts access to certain private zones of a facility (office, warehouse, factory, sports area) to those persons not in possession of a authorized credential or identification.
Enables complete management of an installation with several doors and advanced access control functions: restrictions by user groups, both spatial (areas) and temporal (schedules), anti-passback function, capacity limitation, greater user capacity, activation of devices from the reader, recording of incidents for consultation later, control or security centre.
In contrast with other systems, MDS access control lets you integrate other complementary functions with no need for additional controllers:
- Intercommunication. For those accesses where we have to allow access to other people from outside the facility. By pressing a button we contact the control centre and access is permitted from there.
- Lifts. Access to certain floors may be restricted depending on the identifier.
- Technical or intruder alarms. Each entrance and exit can be programmed with a detection and action time.
- Automation. Weekly programmer which can schedule up to 32 daily activations of relays and arming of sensors, individually or in groups.
The user information and associated restrictions are stored in a Central Unit that takes the decisions to allow or deny access.
In facilities that exceed these specifications (more readers or users) up to 63 central units can be grouped together.
Reader wiring: 2 wires + screened twisted pair
Intercommunication wiring. 4 wires + screened twisted pair

Series 2 Panel.
- Panel measurements: 130x151 mm (width-height):
- Flush-fit box dimensions:: 115x138x45 mm (height-width-depth):
- Surface mounted box dimensions:: 130x151x33 mm (height-width-depth):

Power supply: 12 Vdc
IPK-437
Operating temperature: -10 to 60 ºC
Used in access control installations centralized by means of the MDS or CAC central unit.

It has:
- door sensor (sets off an alarm if the door is left open unintentionally or is forced)
- exit button (for controlled opening from inside)
- Door release connection.

2 wire cables for power supply and twisted pair for data to central unit. In an installation with several readers they can be connected in cascade.
Power supply: 12 Vdc