Fermax 29001 Timer

Zoom

Our Price:   £33.15 List Price:   £44.00 Saving Of:   £10.85 (25%) (Exc. 20% VAT)(£39.78 Inc. VAT) Catalogue No:  29001-Fermax Brand:  Fermax Availability:      Delivery Information Tweet

Fermax 29001 Timer

The timer has the following connections and controls: - PDT relay to activate the external device (C, No, Nc). - Potentiometers to adjust the activation time: Minute adjusted potentiometer (P1) and Second adjusted potentiometer (P2). - Timed Activation Button Connection (S,-): activates the timer relay during the programmed time. - Button connection for Reset (R,-); Allows the timer to be deactivated before the programmed time has elapsed. - Direct Activation Button Connection (Ab ,-): activates the timer relay when the button connected here is pressed. - Connection for call activation (I1, I2): allows the calling wire and the negative from the outdoor panel be connected (4+N systems) and activate the time when making a call.

Necessary to activate an external device (courtesy light, second door, etc) from the corresponding button (additional button) located in the phone or monitor for a set period (timing).

Small size allows installation in electrical cabinets. Can be flush-fit in standard boxes 10x10 cm. With adhesive strips for fixing, or may be screwed directly onto the wall.

- Power supply: 9~14 Vac ;11~18 Vdc - Consumption: With 12 Vdc power supply: 20 mA standby, 50 mA active. With 12 Vac power supply: 50 mA standby, 110 mA active. - Maximum output values: Power (resistive load): 1250VA or 150W Voltage (resistive load): 125 Vdc, 380 Vac. - Maximum Temperature: 0~+65ºC - Timing: P1: between 0 and 6 minutes approximately. P2: between 1 and 60 seconds approximately. - Call Activation: Electronic Call: 4Vpp~18Vpp. Backup Call: 4Vac~12Vac.

Power supply:
9 -14 Vac
11 -18 Vdc
Consumption:
- With power supply 12 Vdc
* Standby: 20 mA.
* Active 50 mA.
- With power supply 12 Vac:
* Standby: 50 mA.
* Active: 110 mA.
Maximum output values:
- Power (resistive load): 1250VA or 150W.
- Tension (resistive load): 125 Vdc, 380 Vac.
Timing:
* P1: from 0 to 6 minutes approx. .
* P2: from 0 to 60 minutes approx.
I1-I2: Call activation:
- Electronic call: 4 Vpp - 18 Vpp.
- Alternate call: 4 Vac - 12 Vac
Dimensions: 62x85x20 mm (height-width-depth).