Fermax 4480 City Classic Panel Prox reader and Keypad

Zoom

Our Price:   £218.20 List Price:   £286.00 Saving Of:   £67.80 (24%) (Exc. 20% VAT)(£261.84 Inc. VAT) Catalogue No:  4480-Fermax Brand:  Fermax Availability:      Delivery Information Tweet

Fermax 4480 City Classic Panel Prox reader and Keypad

Dual security reader. To open the door, in addition to presenting the identifier, a keypad PIN code must be entered. If the code is not associated with the identifier, access is not allowed.
In this way, if a user loses their identifier, anyone who finds it cannot make use of it.

These readers have a display or LED to indicate the PIN being entered.

CityLine Classic is the "continuous profile" outdoor panel line for buildings.

The PANELS are manufactured in anodized aluminium, highly resistant to rough weather and climate changes.

The panel design stands out for its curved-convex profile. A cellular rubber airtight seal included assures a perfect panel-to-wall fit to prevent water filtrations.

Available in several colours: aluminium, golden or bronze and white.

It is possible to combine two or more panels, as long as they are from the same series. For a perfect fit, a set of separators should be used for every two panels installed between their flush mounted boxes.

Colour aluminium
Series 3 Panel.
- Panel measurements: 130x175 mm (width-height):
- Flush-fit box dimensions:: 115x162x45 mm (height-width-depth):
- Surface mounted box dimensions: 130x175x33 mm (height-width-depth).

Wiegand reader. Door controller required (ref.4420). 4420/44201) for connection to access control installation.

Lets you equip the installation with access control with anti-sabotage security, as neither the door opening mechanism nor the exit button connection are built-in. The door controller supports these functions.Can be used with door controllers using Wiegand-26 bit or Magstripe (data/clock) protocols.Device that can be used in "MDS", "CAC" and “Stand-alone in network” centralized access control systems.The access control systems are partly composed of hardware: - Centralized: central units, door controller, readers, guard unit, decoders, etc. - Stand-alone in network : Stand-alone door controller and readers.and partly of software that lets you configure and manage the installation.Access is restricted to certain private zones of a facility (office, warehouse, factory, sports area) for anybody not in possession of an authorized credential or identification.Enables complete management of an installation with several doors and advanced access control functions: Both spatial (areas) and temporal (schedules) restriction of user groups, recording incidents for later consultation.The user information and associated restrictions are stored in a Central Unit (centralized systems) or Stand-alone Controller (Stand-alone in network system) that takes the decisions to allow or deny access.Advanced Functions of Centralized Systems (MDS, CAC):In contrast with other systems, centralized access control systems let you integrate other complementary functions with no need for additional controllers:Anti-passback function, capacity limitation and greater user capacity.· Activation of devices from the reader.- Intercommunication. For those accesses where we have to allow access to other people from outside the facility. By pressing a button we contact the guard unit and access is permitted from there.· Technical or intruder alarms. Each entrance and exit can be programmed with a detection and action time.- Automation. Weekly programmer which can schedule daily activations of relays and arming of sensors, individually or in groups.- Elevators/lifts. Access to certain floors may be restricted depending on the identifier (only in MDS).