Home > Door Entry > Video Wired > Fermax > Access control
(Details shown apply to the default selection)
Catalogue No: 4696Brand: Fermax
Click for delivery info
Telephone type keypad that lets you open the door when a previously programmed 6 digit code is entered.Fermax Marine Line ..... in stainless steel. Marine is the anti-vandal panel line manufactured in 2.5 mm thick stainless steel.. Straight lines that highlight the quality of the steel. State of the art technology and resistance to even the most corrosive, humid and dangerous atmospheres. All panels are supplied with a flush-fit box.Device that can be used in"MDS" and/or "CAC" centralized access control systems. Centralized access control are partly composed of hardware: central units, readers, guard unit, decoders, etc. and one part software that lets you configure and manage the installation. Restricts access to certain private zones of a facility (office, warehouse, factory, sports area) to those persons not in possession of a authorized credential or identification. Enables complete management of an installation with several doors and advanced access control functions: restrictions by user groups, both spatial (areas) and temporal (schedules), anti-passback function, capacity limitation, greater user capacity, activation of devices from the reader, recording of incidents for consultation later, control or security centre. In contrast with other systems, centralized access control systems let you integrate other complementary functions with no need for additional controllers: - Intercommunication. For those accesses where we have to allow access to other people from outside the facility. By pressing a button we contact the guard unit and access is permitted from there. - Technical or intruder alarms. Each entrance and exit can be programmed with a detection and action time. - Automation. Weekly programmer which can schedule daily activations of relays and arming of sensors, individually or in groups. - Lifts. Access to certain floors may be restricted depending on the identifier (only in MDS). The user information and associated restrictions are stored in a Central Unit that takes the decisions to allow or deny access.
Series 1 Panel.- Panel measurements: 150x180 mm (width-height):- Flush-fit box dimensions: 130x160x55 mm (height-width-depth).- Surface mounted box dimensions: 154x184x73 mm (height-width-depth).Power supply: 12 Vdc.The Door Controller can control the following elements for a Door:Entrance and exit readers, one located outside the installation andanother on the inside (optional). Maximum distance between DC and Reader: 10 metres.An exit button that lets you open the door (pedestrian type) from theinside of the installation. If a vehicle door, lets you connect a looppresence induction.A Trades button (business hours) located on the outside of the facility,that lets you open the door during a set schedule.A 4/6 state door sensor. If a vehicle door, lets you connectan inductive validation loop.Two relays. One of them can be used to control the door release, the other is used as an auxiliary relay and can be used to control an alarm associated to the door.Admits connection of standard readers, which can be of four different types:• Readers with data output in Wiegand-26 format.• Readers with data output in MagStripe format (ABA Track II or Data/Clock).• Dallas i-Button type button key readers.• Matrix keypads with data output in 8-bit burst format.Power supply 12 Vdc ± 10% (CN1).Consumption. 15 mA min; 100 mA max.Operating temperature 0 ÷ +60 ºC with H.R. 90% without condensation.Dimensions: 85 x 88 x 25 mm
tand-alone Access Control System. For installations where a simple access control is required, with no incidents record, to complement the audio/video door entry system and enable access to the building for residents, for example: offices, small businesses, garages.
Power supply: 12 Vac/VdcUp to 100 user codes- Code length 4 to 6 digits.- Electric lock release activation by Relay2 A (NA,NC). Programmable 1 to 99 sec. or bistable. - Exit button input. - Free access button (trades) input. - Open Collector auxiliary output (150 mA max) to indicate sabotage attempt or door open/forced.- Confirmation by keypad pulsation tone and acceptance or rejection of the code entered.- Programming from the keypad by master code.- Power supply 12 Vac / 12 Vdc - Consumption: 6 mA (standby), 60 mA (active).- Protection IPK 536
Education, Council, NHS, Police and Emergency ServicesClick Here
© 2017 OLSP Limited.
Order Helpline 0800 880 6123email: @ click here