NC300 Simple IP Bodied Camera
Product Overview
1/3" Sony Super HAD CCD Self Networking IP Colour Bodied Camera, 420 TVL, MPEG-4 Compression, Connect Cameras From Anywhere Using a Unique ID/Password, Multi-Protocols, Free Client Software, Image Quality Settings, Bandwidth Settings, DC 12V.
No Networking experience is required with Genie’s Simple IP camera series. Power up the camera and plug it into a router with an Ethernet cable.This will identify a suitable IP address automatically. Install the GenieView software (from the CD Rom supplied), installation takes seconds! Once launched the user will see a GUI with a list of cameras and blank screens.
The ID card supplied contains the camera’s ID number and a changeable password. This is required to initially connect and locate a camera from the internet (utilises Internet Explorer only). If accessing through the GenieView software, the camera is automatically detected. Now, any user or installer with no IP / Networking experience can install these simple and easy to set up IP cameras!
Key Features
CAMERA FEATURE
- 1/3” Sony Super HAD CCD
- Standard Resolution (420 TVL)
- Bodied Camera, Bullet Camera, Mini Dome Camera and Vandal Dome Camera Options
- Auto White Balance
- Auto Gain Control
- Auto Selection (PAL or NTSC)
NETWORK FEATURES
- Self-Networking
- MPEG-4 Compression
- Connect to Cameras from Anywhere
- Free Client Software
- 4 to 20 Simultaneous Users
- Adjustable Frame Rate
- Image Quality Settings (VGA/QVGA/QQVGA)
- Automatically Adjusts Image Quality by Network Bandwidth
- Bandwidth Settings
- Adjustable Bandwidth from 64 Kb to 1.5Mb
- Manual and Motion Detection Recording
- Multi Protocols
- Web Managed Password Protection
- Supports Microsoft Windows XP or Above
- Minimum Hardware Requirements: Pentium 4 CPU 1.0 GHz or Higher
- ID Card Supplied with each Camera
Technical Specification
Model Number
| NC300 |
| Image Sensor | 1/3 Sony Super HAD CCD |
| Lens | N/A |
| Horizontal Resolution | 420 TVL |
| Sensitivity @ 50IRE (F1.4) | 0.5 Lux |
| Scanning System | 2:1 Interlace |
| Video Format | PAL / NTSC |
| Effective Pixels (H x V) | 500 x 582 |
| Synchronisation | Internal |
| Frequency | Horizontal: 15.625 KHz |
| Shutter Speed | 1/50 ~ 1/100,000 Seconds |
| S/N Ratio | >48dB (AGC Off) |
| Automatic Gain Control | ON / OFF |
| Auto Electronics Shutter | ON / OFF |
| Back Light Compensation | ON / OFF |
| White Balance | ATW / AWB |
| Power Consumption | Max 5.4W |
| Power Supply | DC 12V |
| Operating Conditions | Temperature: -10°C ~ +60°C, Humidity: 30% ~ 80% RH |
| Dimensions (W x H x D) | 57 x 52 x 105 mm |
| Weight | 350g |
| Interface | Ethernet 10/100 Base-T / 100 Base TX Auto MDIX RJ-45 |
| Protocols | IPv4 / HTTP / TCP / ICNP / RTSP / RTP / UDP / IGMP / RTCP / SMTP / FTP / DHCP / UPnP / ARP / DNS / PPPoE |
| Video Output | 1 Composite (1 Vpp 75 Ohm BNC) |
| Video Compression | MPEG-4 |
| Video Resolutions | 176 x 144 / 352 x 288 / 720 x 576 |
| Video Frame Rate Range | 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20 / 25 fps |
| Video Bandwidth | Configurable Between 64k to 1.Mbps |
| Video Management Software | Genie View Software Supports Web Viewing and Archiving (Up to 16 IP Cameras) |
| Video Hardware Requirements | Pentium 4 CPU 1.0 GHz or Higher DRAM 512 MB or Higher |
| Video Supported Operating System | Microsoft Windows XP SP2 or Above Framework 2.0 |
| Users | Up To 5 Simultaneous Users (Unicast) |
| Alarm and Event Management | Events Triggered by Video Motion Detection. Notification by Email Upload JPEG Images to FTP |
