Menvier M600 8 - 40 Zone Grade 2 End Station inc Comms

The M550/600 is designed for maximum flexibility and can be operated from anywhere in the property via multiple remote keypads, it can also be programmed to monitor different rooms at different times.

Key features

• PD6662 grade 2, once the standard is agreed
• Simplified, easy-programmable software
• Energy efficient, intelligent power supplies
• 868MHz narrow-band radio expansion
• Programmable zone configurations simplify system takeovers
• Backward compatibility with Menvier Networker expansion

(image shown is of TS590 - awaiting photography for M series)

Specifications

General
Product name	M550, M600
Security Grade	PD6662: 2004, EN50131-1:2006, TS50131-3:2003, EN50131-6:1997, Grade 1, or 2. DD243:2004.
Sales number	M550/M600
Product Description	40 Zone Grade 2 Panel without comms (M550) / with comms (M600)
Capacities
Max zones	40
Zones - on board	8, CC or FSL
Zones - on expander(s)	32
Standard wired outputs - on board	3
Communicator outputs:	8
Outputs on expander module(s)	None
Setting Levels:	Full set for each ward
Partitions:	4
Log capacity (events):	1000
No. Keypads	16 max
Internal Clock	±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader	Yes
Remote Servicing	None
Security
Access code	4 or 6 digits
Number of user codes	50
Code blocking	Programmable
Proximity tag differs	4,294,967,296
Back tamper (in addition to lid tamper)	Separate terminals
Physical
End Station dimensions:	385(W), 312(H), 95(D) mm
End Station weight (w/o battery):	4.9 Kg
Case material	1.2mm mild steel
Keypad
Keypad name	MKP1, MKP2, MKP3
Environmental
Environmental Grade	Class II
Operating temperature	-10 to 40 C
Humidity	0 to 75% RH, non-condensing.
Radio
Expander/Built-in:	Expander (MRNode)
PSTN Communications	550	600
Built in Communicator	No	Yes
Plug on communicator	No	No
Plug-by communicator (uses screw terminals)	Yes	Yes
Protocols:	n/a	Fast Format, SIA, SIA II, SIA III, Extended SIA II, Contact ID
Speech Dialler	No	No
ATS rating	n/a	2
Line sharing	n/a	Yes
REN	n/a	0.2
Power Supply
EN50131-6 Type	A
Mains power supply	145mA @ 230Vac±10%, 50Hz
End station psu	13.65VDC, 1.25A.
End station consumption	200mA
Communicator consumption	n/a
Standby Battery	12VDC, lead-acid
Max recharge time:	24 hrs max. for 17AH battery
Battery charge limit	750mA
12V Aux supply (inc LS)	Depends on attached peripherals
14V4 supply	None
Data Connections
RS232	No
USB	Yes
Printer	Yes, three pin serial RS232
Ethernet	None
ISDN	None
GSM	None
GPRS	None
Engineer keypad port	Yes
Wired Outputs
Bell trigger	Switched -ve @500mA
Strobe trigger	Switched -ve @500mA
H/0+ (positive holdoff)	Yes
H/0- (negative holdoff)	Yes
O/P 1	1 voltage-free changeover 1A max @ 24Vac or 24Vdc
O/P 2	Switched -ve @500mA
O/P 3	Switched +ve @500mA
O/P 4	n/a
O/P 5-8	n/a
LS (loudspeaker)	16 Ohms
Communication outputs	8. Source 5mA in 12V condition, sink 100mA in 0V condition, selectable output sense
ST (Siren test)	None
Wired Inputs
TR	Yes, -ve
Tellback/Remote reset**	Yes, 0V applied
Line Fault input**	Yes, +12V applied
Aux Tmp	Yes
Fuses
Mains	T315mA 250V 20mm
Other	The panel uses fast-acting polyswitch fuses for overcurrent protection: