Security

Takex 100m External Quad Beam

Takex 100m External Quad Beam
  Zoom
Our Price:  £232.34
List Price:  £268.08
Saving Of:  £35.74 (13%)
(Exc. 20% VAT)(£278.81 Inc. VAT)
+
Variants:  

Catalogue No:  PB-100F
Brand:  Takex

Current Item:  

  

Click for delivery info

Takex

Download Data Sheet


Special Offer:  Free delivery is available when you order £250.00 or more of selected products.

Pulnix - Takex 100m Outdoor / 200m Indoor Intelligent Double Modulated Quad Beam

The Pulnix TAKEX intelligent "QUAD" photoelectric beam is especially designed for outdoor protection.

Unique Quad beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The PB-IN-HF series beams are equipped with many features which provide a wide choice of field selectable options.

These options result in considerable flexibility for a variety of application requirements.

Pulnix PB-IN-100HF 4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]

4 beams are "and-gated", which helps to prevent false alarms from falling leaves and small animals.
The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.

Pulnix PB-IN-100HF FOUR FREQUENCIES SELECTIONS

4 separate choices of frequency avoids cross-talk in stacked or long linear installations.

Pulnix PB-IN-100HF BEAM TRANSMISSION STRENGTH SELECTION

2 levels of beam transmission strength which can be set to suit the protection distance.

EASY BEAM ALIGNMENT

  • Audible signal for alignment [Utillty model]
  • An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.
  • Sensitivity attenuation LED
  • Lights when beam level is attenuated, which shows low sensitivity.
  • Monitor jack output

AUTO-GAIN LOCK

Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Aut-Gain lock is easily confirmed by sound check.

PROGRAMMED AGC

Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

ALARM MEMORY

Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.

PROTECTION AGAINST FROST/DEW

As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

ENVIRONMENTAL MODULE BUILT-IN

Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

  • Wide adjustment (horizontally +/-90°, vertically +/-10°)
  • Tamper output
  • Polycarbonate cover excellent at antishock
  • Optional accessories 

Pulnix PB-IN-100HF Specification

  •     Detection System: Quad, Active Infrared Beam
  •     Wavelength: 940nm
  •     Modulation: Double Pulse Modulation
  •     Protection Distance Outdoors: 100m (330ft.)
  •     Protection Distance Indoors: 200m (660ft.)
  •     Signal Arrival Distance: 1000m(3300ft.)
  •     Response Time: 50-700msec.Adjustable
  •     Frequency Selection: 4 Channels
  •     Alarm Output: Dry Relay Contact, N/O, N/C Switch Selectable Reset: Approx. 1.5 secs.
  •     Contact Rating: 30VAC/DC 1.0A Max
  •     Environmental Output: Dry Relay Contact, N/O, N/C Switch Selectable
  •     Contact Rating1: 30VAC/DC 1.0A Max
  •     Tamper Output: Micro-switch Dry Contact, Form B, N/C
  •     Contact Rating2: 30VDC 0.1A
  •     Alarm Led Red: On at Alarm
  •     Sensitivity Attenuation Led Red: On when beam reception is attenuated
  •     Alarm Memory Led Red: Pulsing at Alarm, Manual Reset: By Auxilliary Switch, Auto Reset:55 to 60mins.
  •     Lens Adjustment: Vertical: 10°, Horizontal: 90°
  •     Supply Power: 10 to 30VDC ( non polarity)
  •     Current Consumption: 70mA typical (105mA Max.at alignment)
  •     Ambient Temperature: -31°F to + 151°F (-35°C to + 66°C)
  •     Installation: Wall or Post mounting
  •     Wiring: Terminals
  •     Accessories: Refer Accessory Listing
  •     Weight: Transmitter: 1200g (42oz), Receiver:1300g (45.5oz)
  •     External Appearance: Body: PC Resin (wine red)

Customers who bought this item also bought: