Scantronic 9651EN43 8 Zone Control Panel + 9943 PROX Keypad

Scantronic 9651EN43 8 Zone Control Panel + 9943 PROX Keypad
Our Price:  £74.71
List Price:  £98.28
Saving Of:  £23.57 (24%)
(Exc. 20% VAT)(£89.65 Inc. VAT)

Catalogue No:  9651EN43
Brand:  Scantronic

Current Item:  


Click for delivery info

Scantronic 9943EN Remote Keypad & ProxScantronic 9943EN Remote Keypad & Prox
Scantronic 9941EN Remote KeypadScantronic 9941EN Remote Keypad
Scantronic Prox Tags - Pack of 5Scantronic Prox Tags - Pack of 5
Yuasa Rechargeable Battery SelectionYuasa Rechargeable Battery Selection


Download Data Sheet
Download User Manual

Special Offer:  Free delivery is available when you order £250.00 or more of selected products.

Scantronic 9651EN41 Professional Intruder Alarm Control Panel & Keypad Pack


The Scantronic 9651EN is a fully programmable, 8 zone security alarm panel designed to conform to PD6662:2004 Grade 2X system requirements.

The 9651EN is ideally suited to both home and small commercial security applications, combining maximum flexibility with ease of use to provide optimum security when and where you need it.

Simple A, B, C and D setting buttons let you to split the system into four areas, enabling you to set the whole, or just parts of the alarm protection.

Up to 4 attractive remote keypads can be added to any system. The 9943 keypad supplied (as pictured) uses a 4 or 6-digit PIN code to control system operation and the ability to use PROX fobs to set/unset the system.

A 9651 panel can be connected to any speech dialler or plug-by digital communicator via its integral communications output socket. Its three fully programmable outputs further enhance system flexibility. A 700 event log, fully date and time stamped to comply with the Association of British Insurers requirements, provides a complete record of system operation and service information.



Product name 9651EN
Security Grade EN50131-1 or PD6662 Grade 2x
Sales number 09651EN-43


Max zones 8
Zones - on board 8 FSL or 8CC (with common tamper)
Zones - on expander None
Standard wired outputs 3
Communicator outputs: 8
Setting Levels: 1 Full + 3  Part (one partition)
Partitions: Four (no part setting partitions)
Log capacity (events): 700
No. Keypads 4
Internal Clock ±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader None


Access code  4 or 6 digits
Number of user codes 50 plus installer
Code blocking Blocked for 90s after 13 incorrect characters in series.
Proximity tag differs 4,294,967,296
End Station  
End Station dimensions: 235mm W, 245mm H, 90mm D
End Station weight (w/o battery): 3.3 kg
Case material Steel


Keypad name 9941/9943


Environmental Grade Class II
Operating temperature -10° to +55°C
Humidity 96% RH


Expander/Built-in: None
Built in Communicator No
Plug on communicator No
Plug-by communicator Provides 8 programmable outputs for plug-by module.
Protocols: Depends on communicator

Power Supply

EN50131-6 Type  
Mains power supply 230VAC +10%/-15%, 200mA max, 50/60Hz ±5%
End station psu 13.8VDC, 1.0A
End station consumption 130mA quiescent, 220mA active
Keypad consumption (Backlight  OFF) 30mA
Keypad consumption (Backlight ON) 70mA
Standby Battery 12V rechargeable lead-acid, gel-type battery.
Low battery voltage cutoff: 10V
Standby time:  Depends on battery
Max recharge time: Depends on battery
Battery charge limit 250mA
12V Aux supply (inc LS) 12VDC min, 13.8VDC max,  ripple ±2% maximum, 500mA,.
14V4 supply None
Monitoring includes Mains fail, battery low voltage, battery failure.


O/P 1 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 2 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 3 Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 4 None
O/P 5-8 None
LS (loudspeaker) Supports two parallel-connected, externally mounted loudspeakers for internal sounder or EE tones: minimum speaker impedance 8Ω.
Communication outputs 12V logic outputs, negative applied in alarm (positive removed), 50mA maximum.
ST (Siren test) None


TR Tamper return for Bell
Tellback/Remote reset** Tellback/Remote reset**. +12V applied to operate reset.
Line Fault input** Line Fault input**. +12V applied to indicate line failure.


Mains The panel uses a T-250mA mains fuse.
Other The panel uses fast-acting polyswitch fuses for overcurrent protection:
  F1 – 12V AUX output
  F2 – Battery output
  F3 – Bus 1

Customers who bought this item also bought: