Successfully dealing with unwanted intruders depends on detecting them as soon as possible on entering a building.
The 714 Passive Infrared Detector and Transmitter is designed to do just that. Its wire-free design enables it to be placed at the point of maximum effectiveness in any room. It can be used to signal the control panel to remotely switch lights, doors, machines and to communicate with your burglar alarm system, building access system or access control system.
Moreover, it can detect human movement up to 15 metres away while simultaneously filtering out environmental factors to prevent false alarms.
And to ensure your transmitter is always working, the long-life lithium battery sends a signal when less than one month’s operation remains.
Quite simply, there’s no more unwanted sight for an intruder.
Applications
- Detect and signal man–sized movements within a 15m range
- Can be used to remotely switch lights, doors and machines
- Can be connected to any standard burglar alarm system via Scantronic receivers
- Can be connected to many building management systems (BMS)
- Can be connected to many access control systems
Specifications
| Part Number | 714rEUR-00 |
| Power Supply | 1 x AA 3.6V Lithium cell |
| Battery Life | Approximately 14 months |
| Operating Temperature | -10 to +55°C |
| Low Voltage Alarm | 2.4V nominal |
| Lens | Standard 15m x 90° |
| White Light Filter | Greater than 2000 Lux |
| RF Immunity | 10V/m |
| Dimensions | 82mm x 71mm x 47mm (H x W x D) |
| Operating Frequency | 868.6625MHz @ 20KHz bandwidth tested to I-ETS 300 220 |
| Transmission Power | 10mW |
| Free Space Radio Range | >1000m |
| Supervision Signal | Every 4 Minutes |
| Compliance | EN50131-3 Security Grade 2 Environmental Class II |
