The 9448+ control panel provides a keypad and LED display built into the front of the case. The installer can connect up to two extra 9427 remote keypads.
The 9448+ES is a blank end station version of the control unit.
The control panel has up to 7 zones of protection, 10 event log, 2 communication outputs and a programmable fire zone. A global anti-tamper zone has been incorporated with provision for 4 output types of Bell, Strobe, PIR Set Latch and Shock Sensor Reset. Easy to operate with full and part set facilities plus the ability to change access codes, to give you a high level of security benefits and total peace of mind.
| Operating temperature | -10º to +50ºC |
| Humidity | 80% RH |
| Dimensions | 210mm W, 210mm H, 65mm D |
| Weight | Approx 1.1kg (without stand-by battery) |
Power Supply
| System Power Supply | 230VAC (Ambient Temp. 20 º. C) |
| Quiescent Panel Power | 50mA nominal |
| Active Panel Power | 150mA nominal |
| 9427 Remote Keypad | 20mA |
| Standby Battery | 12 Volt, 2.1AH rechargeable lead-acid, Gel Type battery |
| Battery Space | 185mm W, 55mm H, 30 mm D |
Outputs
Bell, Strobe, O/P and AUX are open collector transistor outputs.
| Bell | 500mA, 12VDC. negative applied |
| Strobe | 500mA, 12VDC. negative applied |
| O/P | 100mA, 12VDC. negative applied |
| AUX (for detectors) | 300mA, 12VDC |
| Communicator Outputs | PA and Intruder 12V positive removed. |
Fuses
| F1 - Battery | 1A Slow Blow |
| F2 - 12V AUX | 1A Fast Blow |
| F3 - 21 VAC | 1A Slow Blow |
Caution: When replacing fuses use the ratings quoted above. When installed as part of an intruder alarm system this panel is designed to comply with BS4737 for a bell only system.
