GCB01 Video Transformer
Product Overview
Video Ground Loop Isolator, BNC Male to BNC Female with 150mm Leads, Passive - No Power Required, Prevents Video Signal Distortion, Tearing, Crosstalk, Picture Rolling.
Key Features
The GCB01 Video Ground Loop Isolator is a passive device that reduces Ground Loop Interference on composite video signals. It is used in situations where video signals are being transmitted between points with different ground potentials. Unbalanced power line loads typically cause differences in ground potentials.
- BNC Male to BNC Female with 150mm Mini Coax on Both Sides
- Passive, No Power Required
- Prevents Video Signal Distortion Caused by Video Ground Loops
- Built-in TVS (Transient Voltage Suppressor) for Surge Protection
Technical Specification
Model Number
| GCB01 |
| Dimension (Wx H x D) | 84 x 28 x 21mm with 190mm x 2 Cable |
| Insertion Loss | 0.5dB |
| Frequency Response | 0-3dB at 10Mhz |
| Input Resistance | 75 Ohm |
| Output Resistance | 75 Ohm |
| Isolation Voltage | 600VDC (Min) |
| Insulation Resistance | 100M Ohm |
| Transient Voltage Suppressor | 12V rms |
| Material | ABS Black |
