Home > Door Entry > CAME Swing Gate Openers > Frog Accessories
Catalogue No: FROG-ABrand: Came
Click for delivery info
ROG-A is the standard 230V underground motor & gearbox. It is used on older residential systems without encoder monitoring. High voltage motors are suitable for low duty cycle, typically serving up to 6 houses.
FROG-A is compatible with control panels beginning with ZA. For replacement purposes, check the plate fixed to the gearbox has "200 Watts" power. The plate will also have FROG-A on the plate. The FROG-AE can be used as a replacement, but you will not need to connect the encoder on the FROG-AE. The encoder can be unscrewed and taken off.
The FROG motor is bolted into the underground casement on four M12 studs. The power cable is supplied with the motor. It must be connected in the dry above the water table. A ground wire is screwed to an earth stud on the gearbox. A FROG motor can be replaced in about 30 minutes with basic tools. You will need a 17 & 19mm sockets and wrench, a 10mm spanner, some grease, screw drivers
Education, Council, NHS, Police and Emergency ServicesClick Here
© 2017 OLSP Limited.
Order Helpline 0800 880 6123email: @ click here